Subaru - 5th Gen (2017-2023) Impreza Visor Mounts (pack of 2)
from $15.99
This is a 3d Printed Sun Visor Mount meant to replace old and broken OEM mounts on 5th Gen Subaru Impreza's.
No more wobbly, loose, or broken visor.
It will fit the following models:
- 2017-2023 Impreza's
Reach out if you need to verify the fit. You will receive 2 mounts one for the left and right side visor. This is printed in PETG material which is recommended for car parts in order to ensure resistance from the heat, and strength in order to successfully install the mount and not break it. Installation is simple:
a slow and gentle twisting motion will install the mount. In any case if this mount does not fit your vehicle or there are issues with installation, please reach out to me and I’ll work with you to make it right.
DISCLAIMER:
Please note that 3d printing may result in minor imperfections. An effort is made to ensure high quality but some small discrepancies may occur. When installing the mount do be careful as not to overtighten. Your understanding is appreciated and if you have any questions please feel free to reach out and I will be more than happy to answer and to resolve any issues.
Copyright:
This item was 3D modeled to reverse engineer the visor mount fitting this vehicle. Designed to fill a need not offered by the manufacturer. This product is not affiliated with any vehicle manufacturer. Please message me with any questions you may have.
No more wobbly, loose, or broken visor.
It will fit the following models:
- 2017-2023 Impreza's
Reach out if you need to verify the fit. You will receive 2 mounts one for the left and right side visor. This is printed in PETG material which is recommended for car parts in order to ensure resistance from the heat, and strength in order to successfully install the mount and not break it. Installation is simple:
a slow and gentle twisting motion will install the mount. In any case if this mount does not fit your vehicle or there are issues with installation, please reach out to me and I’ll work with you to make it right.
DISCLAIMER:
Please note that 3d printing may result in minor imperfections. An effort is made to ensure high quality but some small discrepancies may occur. When installing the mount do be careful as not to overtighten. Your understanding is appreciated and if you have any questions please feel free to reach out and I will be more than happy to answer and to resolve any issues.
Copyright:
This item was 3D modeled to reverse engineer the visor mount fitting this vehicle. Designed to fill a need not offered by the manufacturer. This product is not affiliated with any vehicle manufacturer. Please message me with any questions you may have.
Primary color:
Quantity:
This is a 3d Printed Sun Visor Mount meant to replace old and broken OEM mounts on 5th Gen Subaru Impreza's.
No more wobbly, loose, or broken visor.
It will fit the following models:
- 2017-2023 Impreza's
Reach out if you need to verify the fit. You will receive 2 mounts one for the left and right side visor. This is printed in PETG material which is recommended for car parts in order to ensure resistance from the heat, and strength in order to successfully install the mount and not break it. Installation is simple:
a slow and gentle twisting motion will install the mount. In any case if this mount does not fit your vehicle or there are issues with installation, please reach out to me and I’ll work with you to make it right.
DISCLAIMER:
Please note that 3d printing may result in minor imperfections. An effort is made to ensure high quality but some small discrepancies may occur. When installing the mount do be careful as not to overtighten. Your understanding is appreciated and if you have any questions please feel free to reach out and I will be more than happy to answer and to resolve any issues.
Copyright:
This item was 3D modeled to reverse engineer the visor mount fitting this vehicle. Designed to fill a need not offered by the manufacturer. This product is not affiliated with any vehicle manufacturer. Please message me with any questions you may have.
No more wobbly, loose, or broken visor.
It will fit the following models:
- 2017-2023 Impreza's
Reach out if you need to verify the fit. You will receive 2 mounts one for the left and right side visor. This is printed in PETG material which is recommended for car parts in order to ensure resistance from the heat, and strength in order to successfully install the mount and not break it. Installation is simple:
a slow and gentle twisting motion will install the mount. In any case if this mount does not fit your vehicle or there are issues with installation, please reach out to me and I’ll work with you to make it right.
DISCLAIMER:
Please note that 3d printing may result in minor imperfections. An effort is made to ensure high quality but some small discrepancies may occur. When installing the mount do be careful as not to overtighten. Your understanding is appreciated and if you have any questions please feel free to reach out and I will be more than happy to answer and to resolve any issues.
Copyright:
This item was 3D modeled to reverse engineer the visor mount fitting this vehicle. Designed to fill a need not offered by the manufacturer. This product is not affiliated with any vehicle manufacturer. Please message me with any questions you may have.
This is a 3d Printed Sun Visor Mount meant to replace old and broken OEM mounts on 5th Gen Subaru Impreza's.
No more wobbly, loose, or broken visor.
It will fit the following models:
- 2017-2023 Impreza's
Reach out if you need to verify the fit. You will receive 2 mounts one for the left and right side visor. This is printed in PETG material which is recommended for car parts in order to ensure resistance from the heat, and strength in order to successfully install the mount and not break it. Installation is simple:
a slow and gentle twisting motion will install the mount. In any case if this mount does not fit your vehicle or there are issues with installation, please reach out to me and I’ll work with you to make it right.
DISCLAIMER:
Please note that 3d printing may result in minor imperfections. An effort is made to ensure high quality but some small discrepancies may occur. When installing the mount do be careful as not to overtighten. Your understanding is appreciated and if you have any questions please feel free to reach out and I will be more than happy to answer and to resolve any issues.
Copyright:
This item was 3D modeled to reverse engineer the visor mount fitting this vehicle. Designed to fill a need not offered by the manufacturer. This product is not affiliated with any vehicle manufacturer. Please message me with any questions you may have.
No more wobbly, loose, or broken visor.
It will fit the following models:
- 2017-2023 Impreza's
Reach out if you need to verify the fit. You will receive 2 mounts one for the left and right side visor. This is printed in PETG material which is recommended for car parts in order to ensure resistance from the heat, and strength in order to successfully install the mount and not break it. Installation is simple:
a slow and gentle twisting motion will install the mount. In any case if this mount does not fit your vehicle or there are issues with installation, please reach out to me and I’ll work with you to make it right.
DISCLAIMER:
Please note that 3d printing may result in minor imperfections. An effort is made to ensure high quality but some small discrepancies may occur. When installing the mount do be careful as not to overtighten. Your understanding is appreciated and if you have any questions please feel free to reach out and I will be more than happy to answer and to resolve any issues.
Copyright:
This item was 3D modeled to reverse engineer the visor mount fitting this vehicle. Designed to fill a need not offered by the manufacturer. This product is not affiliated with any vehicle manufacturer. Please message me with any questions you may have.
